Basic consideration of a nuclear power monitoring system using neutron-induced prompt gamma rays
Journal of Nuclear Science and Technology Vol. 57 No.5 P.514-522 , 2019
Wind shear estimation model using load measurement of wind turbine tower and surrogate model
Wind Energy Vol.23 No.2 P.327-339 , 2019
Suppression of irreversible capacity for Li1.16Ni0.37Mn0.47O2 due to the chemical treatment with (NH4)2SO4 in lithium ion batteries
Journal of Electroanalytical Chemistry Vol. 855. P.113492 , 2019
X-ray absorption fine structure analysis for crystal structure change of vanadium-substituted lithium silicate、 Li2.2Fe0.4Mn0.4Si0.8V0.2O4、 during charge-discharge cycles
Journal of Power Sources Vol.443 P.227189 , 2019
事前知識を利用した応答曲面作成方法に関する検討とピンフィンヒートシンクへの適用
日本機械学会論文集 2019年 85巻 880号 p.19-00194
Sm-Fe-N系ボンド磁石適用によるアモルファスモータの高出力化
電気学会論文誌D(産業応用部門誌) 2019年 139巻 12号 p.1015-1021
多端子直流送電における有効電力・直流電圧リミッタ付ドループ制御の開発
電気学会論文誌B(電力・エネルギー部門誌) 2019年 139巻 12号 p.731-736
3極磁場構造による光ディスク装置用対物レンズアクチュエータの高次共振振幅の低減
日本AEM学会誌 2019年 Vol.27 No.4 P.428-435
Novel Criteria for Reluctance Torque Utility of Permanent Magnet Motors
IEEE Transaction on Energy Conversion Vol.34 No.4 P.1751-1758
Mobile Robot for Stocking and Disposing Objects in Convenience Store with Universal Vacuum Grippers Grasping and Dual-Arm Manipulation
Advanced Robotics Vol. 34、 2020 - Issue 3-4、 P. 219-234
モバイルネットワークにおける異常フローの分散管理遮断方式
論文誌「ユーザブルセキュリティ」特集 Vol.60 No.12 P.2245-2258
Fabrication of Tissue-Engineered Cell Sheets by Automated Cell Culture Equipment
Journal of Tissue Engineering and Regenerative Medicine Vol. 13 No. 12 P.2129-2311
Evaluation of Performance of Anomaly Detection Systems based on Adaptive Resonance Theory
Journal of Chemical Engineering of Japan Vol.52 Issue 11 P.843-850 ,2019
An On-Demand Alternate Transportation Service System for Public Transportation using Real-Time Multi-agent Technology
Information Engineering Express Vol.5 No.2 P.109-119 , 2019
社会システムに関する思索的将来像のための議論のフレームワーク
デザイン学研究 Vol.66 No.1 P.39-44
太陽光発電向け新規変動抑制アルゴリズムの開発
電気学会論文誌B(電力・エネルギー部門誌) Vol.139 No.11
Microscopic observation of precipitation behavior at friction stirring zone of super duplex stainless steel
Material Transactions 2019年 60巻 9号 p. 2003-2007
Heat and radiation resistances of diamond semiconductor in gamma-ray detection
Japanese Journal of Applied Physics Vol.58 No.10 P.106509 , 2019
Influence of Sintering Condition on Bending Tolerance at RT and Critical Current of in situ MgB2 wire
Cell sheet fabrication of human induced pluripotent stem cell-derived retinal pigment epithelium by cell culture equipment with closed culture system for regenerative medicine
Development of a Control Method for LLC Converter Utilized for Input-Parallel-Output-Series Inverter System with Solid-State Transformers
IEEJ Journal of Industry Applications Vol.8 No.4 p.652-659, 2019
Adaptive Motion Planning for a Collaborative Robot Based on Prediction Uncertainty to Enhance Human Safety and Work Efficiency
IEEE Transaction on Robotics Vol.35 No.4 P.817-832, Aug. 2019
Effect of Dopants on Strontium-Adsorption Performance of Metal-Doped Antimony Ion Exchangers
Journal of Chemical Engineering of Japan Vol.52 No.8 P.694-701, 2019
Effect of Lithium/Transition-Metal Ratio on the Electrochemical Properties of Lithium-Rich Cathode Materials with Different Nickel/Manganese Ratios for Lithium-Ion Batteries
Chemistry Select Vol.4 Issue.32 P.9444-9450, August 2019
An Auto-Tuning Damper for the Harmonic Resonance of Grid-Connected Converters
IEEJ Journal of Industry Applications Vol.8 No.6 p.884-892, 2019
Feasibility Study of Vision-based Localization Method for Stopping Control Using Real Environment Data
IEEJ Journal of Industry Applications Vol.8 No.6 p.934-940, 2019
Fingertip-Sized Pressure Sensor for Luer Taper of Three-Way Stopcock in Liquid Channel
Journal of Medical Devices Vol.13 No.3 P.031006, Sep 2019
Formation of a hydrophobic polyiodide complex during cathodic oxidation of iodide in the presence of propylene carbonate in aqueous solutions、 and its application to a zinc/iodine redox flow battery
Electrochimica Acta Volume.319, P.164-174, October 2019
Degradation Mechanism of LiCoO2 under Float Charge Condition at High Temperature
Electrochimica Acta Volume 320 P.134596, October 2019
Fracture criterion considering notch brittleness of polytetrafluoroethylene under quasi-static loading
Theoretical and Applied Fracture Mechanics Vol.103 P.102285, October 2019
Development of Air Conditioner Operation Planning Method Using People Flow Information
IEEJ Transactions on Electrical and Electronic Engineering Vol.14 Issue.10 P.1500-1506, October 2019
Output Current Ripple Reduction of LED Driver Using Ceramic-Capacitor-Input Circuit and Buck-Boost Converter
Electrical Engineering in Japan Vol.209 Issu.3-4 P.26-34, November 2019
マルコフチェーン・モンテカルロを用いた実稼働伝達経路分析における振動騒音伝達率レベルの確率推論方法
日本機械学会論文集 2019年 Vol.85 No.876 p.19-00252
重量物衝突時の発電所配管設備の健全性評価解析
日本機械学会論文集 2019年 Vol.85 No.876 P.19-00132
高速応答と微小噴射を実現するガソリンインジェクタ磁気回路の新構造
自動車技術会論文集 2019年 50巻 5号 p.1206-1211
2軸ひずみ計測用半導体センサの開発
日本機械学会論文集 2019年 85巻 877号 p.19-00023
ITER NBI 用-1MV短絡時におけるサージ吸収システムの開発
電気学会論文誌B(電力・エネルギー部門誌) 2019年 139巻 9号 p.576-583
セラミックコンデンサ入力回路と昇降圧チョッパを用いたLED点灯回路の出力電流脈動低減法
電気学会論文誌D(産業応用部門誌) 2019年 139巻 9号 p.806-813
隊列走行におけるG-Vectoring制御の適用検討
自動車技術会論文集 2019年 50巻 5号 p.1383-1389
生産から消費まで一貫した温度管理を実現する温度検知インクと流通品質管理システム
電気学会論文誌E(センサ・マイクロマシン部門誌) 2019年 139巻 10号 p.354-358
圧電式慣性型アクチュエータを用いた電子顕微鏡向け二軸アクティブ制振システムの開発
日本機械学会論文集 2019年Vol.85 No.878 p.19-00161
放流汚濁負荷を低減する雨天時下水処理運転管理に向けた汚泥流出リスク予測手法の検証
学会誌「EICA」 2019年 Vol.24 No.2/3 P.14-21
複数の移動体を同時に追尾・撮影する監視システム
産業応用部門論文誌 2019年 139巻 11号 p.908-915
横磁束型リニア同期モータ向け2次元磁界解析モデルの提案
電気学会論文誌D(産業応用部門誌) 2019年 139巻 11号 p.933-938
再利用型自動メッシュ生成のための高精度類似部分形状検索技術の開発
日本機械学会論文集 2019年 Vol.85 No.880 p.19-00138
組込みシステムのプロダクトライン開発における再利用性を考慮したシステムアーキテクチャ評価手法
情報処理学会論文誌 2019年 Vol.60 No.8 P.1350-1359
Oil-gel-based phantom for evaluating quatitative accuracy of sound speed in ultrasound computed tomography
Ultrasound in medicine and biology
Generating Mathematical Model of Equipment and Its Applications in PHM
2019 IEEE International Conference on Prognostics and Health Management
磁化反転メカニズムの本質的解明に向けた計測とシミュレーション
平成30年基礎・材料・共通部門大会 (A部門大会)
Variable-energy isochronous accelerator with cotangential orbits for proton beam therapy
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment Vol.922 P.352-356, April 2019
Two-View Monocular Depth Estimation by Optic-Flow-Weighted Fusion
IEEE Robotics and Automation Letters Vol.4 No.2 P.830-837, April 2019
Effect of artificial MgO pinning centers introduced by residual moisture in a deposition chamber on J c –B–T characteristics and film structure of 10 μm thick MgB2 films deposited on Cu substrates
Superconductor Science and Technology Vol.32 No.4 P.045004 , April 2019
Development of a Heating Process of a Slag-Tapping Hole by Syngas Burning in a 150 t/d Entrained-Bed Coal Gasifier
Energy & Fuels Vol.33 No.4 P.3557-356, April 2019
Improvement in lateral resolution of through-transmission scanning acoustic tomography using capacitive micromachined ultrasound transducer
Microelectronics Reliability Volume 93, February 2019, Pages 22-28
機械学習による予測に寄与した特徴量抽出のための相関分析手法を用いた要因分析技術
医療情報学会 38巻6号 Vol. 38 No.6 P.351-357
Effect of the premixing of MgB2 powder on microstructures and electromagnetic properties in PIT-processed MgB2 wires
Materials Research Express Vol.6 No.2 P.026003, February 2019
Two-View Monocular Depth Estimation by Optic-Flow-Weighted Fusion
IEEE Robotics and Automation Letters Vol. 4 No. 2 P.830-837
Computational Aspect Analysis of Real-Time Systems: Application to HDD Servo Control
IEEJ Journal of Industry Applications 8巻1号P124-130
POMVCC: Partial Order Multi Version Concurrency Control
Soft18v11n34 Vol.11 No.3&4 P.452-465
Analysis of multipole fields for a practical wire lens of an aberration corrector
Journal of Vacuum Science & Technology B Vol.37 Issue 1
Direction Finding Techniques in Reactive Near Field of Impulsive Electromagnetic Noise Source Aiming at Pantograph Arcing Localization
IEEE Sensors Journal Vol. 19 No. 11 P. 4193-4200
Fast Evaluation of Microstructure-Property Relation in Duplex Alloys Using SEM Images
MRS Advance Vol. 7 No. 1
A polling-based transmission scheme using a network traffic uniformity metric for Industrial IoT applications
Special Issue "Intelligent Internet of Things (IoT) Networks"
Signature Schemes with a Fuzzy Private Key
International Journal of Information Security
KRAS genotyping by digital PCR combining melting curve analysis
Scientific Reports Vol.9 No.1 P.2626
Defect Detection Techniques Robust to Process Variation in Semiconductor Inspection
Measurement Science and Technology Volume 30, Number 3
Impact of secondary electron emission noise in SEM
MICROSCOPY https://doi.org/10.1093/jmicro/dfz009
Sensor-less Fault-Diagnosis Architecture for Large-scale Photovoltaic Power Plants
ieee journal of photovoltaics Vol. 9 No. 3 P. 780-789
Stress-rate effect on time response of mechanoluminescent-sensor luminescent intensity
Optics Express
Influence of e-beam aperture angle on CD-SEM measurements for high aspect ratio structure
Journal of Micro/Nanolithography, MEMS, and MOEMS Vol.18 No.2 P.021204
Three-dimensional numerical analysis of particle-size distribution of clusters in unsteady shear flow
Advanced Powder Technology Vol.30 No.4 P.774-785
A New Automated Guided Vehicle System using Real-time Holonic Scheduling for Warehouse Picking
IEEE Robotics and Automation Letters Vol.4 No.2 P.1045-1052
Effect of bumps on the stability of water droplets on the pillar surface
Japanese Journal of Applied Physics
Effect of anisotropy in the build direction and laser-scanning conditions on characterization of short-glass-fiber-reinforced PBT for laser sintering
Optics & Laser Technology Vol. 113+D25 P.345-356
RL78マイコン向け命令スケジューラによるパイプラインストールの削減
情報処理学会論文誌 プログラミング Vol.12 No.1 P.1-9
CNNを用いた免疫染色特徴量推定による腫瘍組織識別技術
日本医用画像工学会学会誌 Vol.37 No.3
移動体データに関する国際標準OGC Moving Featuresとその適用事例
情報処理学会デジタルプラクティス
異種交通連携サービスの実現に向けたスキーママッチング手法の提案
C部門誌特集号 ビジネスシステム イノベーション Vol.139 No.6 P.
クラウドマニュファクチャリングにおけるリソースマッチングの安定性に関する考察
日本機械学会論文集 Vol.85, No.870
プラズマエッチング装置用イットリウム系材料の結晶構造と異物発生メカニズムの検討
X線分析の進歩 Vol.50. P.197-205
並列度自動調整によるPentaho のETL処理高速化
研究開発レター 139巻4号
DevOpsを活用した協調型データ準備プロセス
デジタルプラクティス DP39号
Mechanical and corrosion properties of CoCrFeNiTi-based high-entropy alloy additive manufactured using selective laser melting
Additive Manufacturing Vol.25 P.412-42, January 2019